Every glass of water
back to its original purity

Whole-house purification · 10-stage filtration · 0.0001 micron reverse osmosis

No additives, no scaling, no residual chlorine. From the kitchen tap to the whole-house circuit, this is where a family's drinking water starts.

Serving 12,000+ households · full range certified for drinking water hygiene

99.95%

Heavy metal removal, whole unit

99.9%

Disinfection by-product removal

0.0001μm

Reverse osmosis precision

10 stages

Progressive purification system

From tap water to drinking water
0.0001 micron stands between

Every order of magnitude in filtration leaves an order of magnitude less behind. Four stages return a glass of water to what it should be.

Filtration precision scale: pore size compared across microfiltration, ultrafiltration and reverse osmosis
  1. 01Pre-filtration

    Catches sand, rust and coarse particles, taking the first hit so later cartridges do not have to.

  2. 02Activated carbon

    Adsorbs residual chlorine, odours and organic compounds, restoring a clean taste to begin with.

  3. 03RO reverse osmosis

    A 0.0001 micron pore size stops heavy metals, bacteria and viruses here.

  4. 04Post mineralisation

    Returns calcium, magnesium and potassium, back to the sweetness of spring water.

Ten layers of media, doing one thing

Purification is not adding features; it is removing impurities layer by layer.

Ten-stage deep purification system: layer upon layer of protection for safer drinking water at home

Progressive filtration

Media arranged by increasing precision — coarse first, fine later — so every cartridge carries a more even load.

High flow output

With several outlets running at once, flow holds steady — filling a jug takes no waiting.

Performance that holds

Purified flow and membrane throughput stay above the rated standard, with no discount for time.

Independently measured: Heavy metal removal, whole unit 99.95%, and Disinfection by-product removal 99.9%.

Nine "zeros"
our definition of pure

No bisphenol A, no scaling, no residual chlorine, 0 VOC, 0 lead, 0 additives — not a slogan, but a line on the factory test report.

Source: factory test report for the complete unit

Nine

Quality you can see, details you can feel

Good water is the outcome; being easy to live with is what you face every day.

An under-sink purifier with a minimal matte finish

Minimal matte body

Suits any cabinet and stays out of sight, blending into any kitchen worktop.

Drawing water from a smart tap with a water quality display

Smart display tap

Water quality visible at a glance — one glass and you have the answer.

Replacing a cartridge: press the lever to unlock and pull it out by hand

Cartridge change in three seconds

Flip down to unlock, pull out by hand — no waiting for an engineer.

Under-sink installation diagram: inlet, power, drain and smart tap routing points with unit dimensions

The engineering hidden in your cabinet

Inlet, outlet, power and drain each run independently, taking no more cabinet space than needed.

Independent 220 V supply

No shared circuit with other appliances, so operation stays stable.

Dual pure / mineral circuits

One line for pure water, one for mineralised, without interfering.

Smart tap cable

Signal and power in a single run, leaving only one hole in the worktop.

Independent waste line

Connects to a dedicated drain — no backflow, no standing water.

Whole-house purification protects more than drinking water

A pre-filter paired with a high-flow purifier means every water-using appliance suffers a little less.

Whole-house diagram: where the pre-filter and high-flow purifier sit in the home water circuit

Pre-filter

Removes coarse particles and extends the life of the purifier.

High-flow purifier

Fine filtration that safeguards drinking water across the whole house.

Half the service life of a water heater, washing machine or dishwasher comes down to the water.

Pure water reassurance, mineral nourishment: 90.9% targeted heavy metal removal

Test the water first, then decide whether to install

An engineer takes samples on site, with results in 30 minutes. If the water is fine, we will say so.

Free testing · any brand · no consumables pushed