®01
Renovation residue keeps releasing
Formaldehyde and TVOC in boards and adhesives can release for years; ventilation carries away only part of it.
Air Purification
Test first, then treat
Test data tells us what the pollutants actually are, and we work on both fronts — source treatment plus continuously running equipment — breaking down formaldehyde and TVOC, removing particles and odours, balancing humidity and suppressing mould. The job is delivered only when the re-test passes.
What indoor air looks like without purification
The pollution you cannot see is the part that affects health over time.
02
Particles keep rising again
PM2.5, dust and pet dander float, settle, and are stirred up again in a sealed room — a repeated inhalation cycle.
03
Odours are hard to remove
Cooking fumes, smoke and pet smells soak into fabrics and soft furnishings — ventilation and fragrance only mask them briefly.
04
Humidity out of balance
Too damp and mould and mites thrive while furniture absorbs moisture; too dry and throats itch, skin tightens and airways grow sensitive.
05
Bacteria and mould spores
Damp corners and the inside of air conditioners breed mould; spores travel with the airflow across the whole space, almost unnoticed.
06
Opening windows is not enough
Outdoor pollution, noise, security and the air-conditioning season all turn "open the windows more" into advice that is hard to follow.
Air purification is not buying a machine — it is first finding out where the pollution comes from, what it is, and how much there is, then deciding what to do.
Why choose us
Purification can be measured, so we speak with data rather than persuasion.
01
Test first, treat after
We sample and test first to establish the pollutants, their concentrations and the main sources, then propose a plan — no quoting on gut feeling.
Test first, plan second
02
Treatment and maintenance together
Each pollutant is matched with the right high-efficiency agent for targeted treatment, then held in place by continuously running equipment — covering both the one-off job and the long-term result.
Two paths treat + maintain
03
Delivered only when the re-test passes
After treatment we re-test to the same standard and hand over only when the data confirms it — results that are verifiable and traceable.
Re-test then handover
04
A constant-clean air system
Purifiers, ionisers, humidifiers, dehumidifiers and disinfection units are specified as needed and combined flexibly, adjusted to conditions around the clock to keep the air clean, fresh and comfortable.
5 equipment types, matched on demand
05
Across many types of space
We have served homes, schools, office buildings, hotels, clubs, libraries, laboratories, vehicle cabins and other special indoor environments.
2014 founded in Shanghai
06
Long-term care and consumables
Proactive reminders when filters fall due, on-site replacement as needed, and periodic air quality follow-up — so results do not fade with time.
Full-cycle result tracking
Five Core Capabilities
A complete loop from testing to maintenance, with something tangible delivered at every step.
01
Testing & assessment
On-site sampling plus laboratory analysis to establish concentrations and sources of formaldehyde, TVOC, benzene, toluene, xylene, ammonia, PM2.5, PM10, carbon monoxide and carbon dioxide.
Indoor Air Quality Test Report
02
On-site treatment
Deep treatment and breakdown for boards, fabrics, upholstery, leather, wallpaper, carpet and stone, until safe values are reached.
Treatment Plan and site records
03
Equipment deployment
Purification equipment combinations and placement set by floor area, pollutant type and occupancy density.
Equipment Proposal and layout plan
04
Re-test & acceptance
Re-testing to the same standard after treatment; handed over once the data passes, with guidance on use and upkeep.
Re-test Report and pass conclusion
05
Long-term maintenance
Reminders when filters and consumables fall due, on-site replacement and result tracking to keep compliance stable over time.
Maintenance Plan and consumable list
Purifiers: judged by what matters, not by layer count
Specified around the pollution source to guard every breath, around the clock.
-
01
Pre-filter
Catches hair, dander and large lint particles to protect later layers; washable and reusable, low upkeep cost.
-
02
HEPA filtration
A pleated high-efficiency filter reaching up to 99% on PM2.5, with air resistance and noise kept under control.
-
03
Activated carbon
A high-iodine carbon layer adsorbs formaldehyde, benzene series, ammonia and TVOC, keeping odours from returning.
-
04
Clean air delivery rate
CADR shows how much clean air a purifier outputs per hour — the higher the figure, the faster the purification. CADR ≥ 400 m³/h.
-
05
Cumulative clean mass
CCM shows how much pollutant a filter can handle from new to spent — higher means longer life and better durability. CCM reaches P4 / F4.
-
06
Ion layer
Charges particles so they agglomerate, settle or are captured; assists disinfection, deodorisation and freshness. Certified ozone-free.
-
07
Others
Noise as low as 20 dB; seal leakage ≤ 1%; PM2.5 / formaldehyde / TVOC sensors available as options.
Five equipment types, combined as needed
Purification is never one machine. Combining equipment by floor area, pollutant type and occupancy is what makes it sufficient without waste.
-
01
Air Purifier
Continuous breakdown of particles plus formaldehyde / TVOC
Nursery · study · living room · rooms occupied for long periods
-
02
Negative Ion Generator
Settles airborne particles and freshens the air
Office lobby · gym · public corridors (best alongside a main purifier)
-
03
Humidifier
Holds humidity at 40–60%, easing dryness and airway discomfort
Northern heating season · air-conditioned rooms · spaces with wooden furniture or instruments
-
04
Dehumidifier
Keeps relative humidity ≤ 60%, suppressing mould and dust mites
Basement · bathroom · humid southern seasons · storage
-
05
Space Disinfection Unit
Short intensive disinfection, inactivating bacteria and viruses by UV / plasma
Hospitals · schools · commercial kitchens · lobbies and public areas in flu season
How We Deliver
Source control + ventilation + supplementary purification + CMA testing + maintenance
Delivery Process
Five steps from testing to maintenance
How We Deliver
Every step comes with written deliverables, so the owner can check at each milestone — or commission an independent re-test.
- Testing & assessment: identify pollutants and concentrations
- Treatment: break down and remove at the source
- Equipment deployment: purification with humidity coordination
- Re-test & acceptance: handed over only when data passes
- Long-term maintenance: consumable replacement and tracking
Where It Applies
Newly decorated, refurbished or long-sealed spaces all deserve a test first.
Space Types We Have Served
Pollutant profiles and acceptance criteria differ greatly by sector, and so does the plan.
Service Guarantee & Aftercare
Purification fades with time, so our service continues past handover.
01
Re-test & acceptance
Verified Delivery
Re-tested to the same standard after treatment with a report issued; handed over only when data passes, and you can verify the conclusion yourself.
02
Result guarantee
Effect Guarantee
Re-tested at the agreed intervals; if it does not pass we return and re-treat at no extra treatment charge.
03
Regular follow-up
Regular Visit
Follow-up visits at 3, 6 and 12 months after delivery to track air quality and equipment condition.
04
Consumable reminders
Filter Management
Proactive reminders when filters and consumables fall due, with on-site replacement available, so efficiency never quietly decays.
After-sales hotline 134 8258 3996
A Purification Plan for Your Space
Book a free test and our engineers will come back with verifiable treatment and purification recommendations.
Book free testing